Produkter för industriproffs

Stable and safe work trestle that can withstand high stresses and daily use. Large top plate 300x600 mm. Equipped with 80 mm deep and grooved steps. Strong aluminum profile provides stability without making the work trestle heavy. Two solid braces lock the work trestle when it is unfolded and make it extra stable. Top plate with end protection in plastic.

Tunn, handflatedoppad arbetshandske i nitril, mikrofoam som ger ett mycket bra torrgrepp och en barriär mot väta. Godkänd för kontaktvärme nivå 1. Oeko-Tex-godkänd.

Powerful Li-Ion battery with extra long operating time. High power, fast charging and long life. Built-in rapid cooling function Cool-Cycle, active cooling technology to return to full capacity faster. The cooling function works with Milwaukee's supercharger M18 DBSC and fully charges in 45 minutes. Delivers extra high power in a more compact and lighter format. Optimized for the most charges and the best performance during battery life. Redlink technology that prevents overheating. Protected against weather and environmental conditions in the workplace. Resistant battery housing designed for increased protection against common oils, solvents and greases. B battery indicator that can also be read in direct sunlight. Compatible with all Milwaukee M18 tools.

Powerful drill driver 18 V Li-Ion with carbon brushless motor. Extremely compact design, only 173 mm long. High efficiency even under heavy load. Maximum torque of 158 Nm. Two-speed. Advanced digital overload protection for tool and battery. Equipped with Autostop which provides increased safety for the user. Individual cell monitoring for optimal operating time and long service life. Battery indicator. LED lighting. Reversible metal belt clip. Flexible battery system, fits all Milwaukee M18 batteries.
Standard equipment: 2 pcs 5.0 Ah Li-Ion batteries, charger, side handle and stackable HD box.

Crowbar of octagonal special alloy steel. Fully hardened and tempered. Finely ground, polished and clear lacquered work surfaces. Painted red.

(HTML text not available)

Combi Tack 547 tillhör en ny generation av MS-fogmassor som inte innehåller isocyanat. Den är baserad på hybridpolymer som kombinerat de bästa egenskaperna från silikon och polyurethan. Fogmassan härdar genom luftfuktighet. Combi Tack 547 är luktfri, snabbhärdande, övermålningsbar och har mycket god beständighet mot klimatpåverkan. Combi Tack 547 används till skarvar i karosseri-, skepps- och containerindustrin, där det önskas en hård och beständig limning/fogning. Combi Tack 547 är dessutom lämplig till fogar i trä och betonggolv.
Combi Tack 547 är godkänd för indirekt kontakt med livsmedel.

Effective grass trimmer 18 V Li-Ion with carbon brushless motor. Variable speed with 2-stage electronic speed control. Soft start. Cutting width of 300 mm. Low noise and vibration level. Replaceable trimmer head.
Standard equipment: Trimmer head Tap & Go 2.0 mm x 4 m and shoulder strap.
Supplied without battery, charger and storage bag.

Half mask in Premium Pack. With excellent fit, high protective effect and very good breathing comfort for the toughest areas of use. Made of silicone. The mask is equipped with two exhalation valves that provide a very low exhalation resistance. The valve covers with screens effectively protect the exhalation membranes against dust and dye. Materials and color pigments in the mask frame are FDA and BGA approved for food, which minimizes the risk of contact allergies. The mask's easily adjustable elastic band stand is designed as a v-loop and has a large cupped head plate, which contributes to a comfortable and secure fit. The mask is used as filter protection in combination with filters from Sundström's filter range or in combination with compressed air additive SR 307, which then forms a breathing apparatus with continuous flow for connection to compressed air.
Contents: Half mask (size M/L ), 1 pc particle filter SR 510 P3 R, 1 pc gas filter SR 217 A1, 5 pc pre-filter, pre-filter holder, cleaning tissue, ID label, user manual and storage box.
Use temperature: -10°C - +55°C
Assigned protection factor: 20
Nominal protection factor: 48 (P3), 50 (GasX P3), 48 (GasX P3)
Weight: 180 g

Approved/Certified according to:
EN 140:1998

Robust and flexible craftsman position. Easy handling of the stand frame and smooth snap locks, lock and fold the stand with just one click. Equipped with Ø 125 mm swivel castors with locking brake, can be upgraded to height-adjustable castors using a castor adapter. Platform size 1.80 x 0.60 m. Can be built on with extension package. In accordance with EN 1004, scaffolding class 3 (can be loaded up to 200 kg/m²).
Extension package 1 m
Builds on PaxTower 1T with one meter. Low friction when the frames are put together, low-friction studs in nylon make the frames easy to assemble.
Contents:
2 pcs Pax S-Plus railings, 2 pcs Pax railing frames 1 m, 1 pc Pax Diagonal brace and 1 Pax horizontal brace.
Extension package 2 m
Builds on PaxTower 1T with two meters. Always placed at the top. Low friction when the frames are put together, low-friction pin in nylon makes the frames easy to assemble.
Contents:
2 pcs Pax S-Plus rails, 2 pcs Pax Rail frame 2 m, 1 pc Pax Platform with door.
Support legs package
Contents:
4 pcs of support legs for PaxTower 1T.
Skipper package
Patented and easy-to-use kick bar. Mounts quickly and easily.
Contents:
2 pcs Pax skirting boards 0.72 m. 2 pcs Pax skirting boards 1.80 m.
Intermediate ladder< br>Ladder for PaxTower 1T, with 7 steps for access between the platforms of the scaffolding. 80 mm deep steps with integrated anti-slip protection.
Wheel adapter for height adjustment
Mounted on the castors included with the PaxTower 1T, to be able to adjust the height of the wheels. Adjustment range: 6.5 cm. Supplied in 4-packs.

Shorts in 4-way stretch material. Reinforced with durable Cordura ripstop material with 4-way stretch on thighs and back. Ribbed stretch section at the waist. 2 Cordura reinforced loose hanging nail pockets, one with 3 smaller pockets and tool holders and the other with an extra pocket. D-ring under loose hanging pocket. 2 front pockets. 2 back pockets with zipper. 2 leg pockets with zipper and ventilation mesh in the opening. Ruler pocket made of Cordura with tool pocket, pen pocket and button and slot for knife. Leg pocket with phone pocket in stretch material. Hammer handle. Rubberized button. Double reinforced crotch seam. Elastic band edging at leg ends. Wash 60°C.
Materials: 55% elastomultiester, 45% polyester, weight 218 g/m². Ripstop material 88% polyamide, 12% elastane, weight 260 g/m².

Approved/Certified according to:
OEKO-TEX 100

Full mask with excellent fit, high protective effect, eye protection and very good breathing comfort for the toughest areas of use. Made of silicone. Fits most face sizes. Spherical visor in scratch-resistant polycarbonate that provides a large field of vision. Equipped with three inhalation and two exhalation valves, which gives a very low breathing resistance. The exhalation valves' valve caps with shields effectively protect valves and diaphragms against dust and dye. The design and placement of the exhalation valves improve the possibilities of communication. Materials and color pigments in the mask body are FDA and BGA approved for food, which minimizes the risk of contact allergies. Adjustable elastic band stand is attached to the visor frame and to the exhalation valves, which together with a large head net contributes to a comfortable and safe fit.
The mask is used either as filter protection in combination with filters from Sundström's filter range or as breathing apparatus with continuous flow together with compressed air additive SR 307 .
The mask completed with hose SR 550 (PU) or SR 551 (rubber), it can also be used as a facepiece together with Sundström's fan SR 500 or SR 700.
Together with fan SR 500 EX, it is approved for use in explosive atmosphere.
Contents: Full mask, filter adapter, pre-filter, pre-filter holder, cleaning wipe, ID label and user manual.
Use temperature: -10°C - +55 °C
Assigned protection factor: 500 (P3), 500 (GasX)
Nominal protection factor: 1000 (P3), 2000 (GasX), 1000 (GasX P3)
Weight: 450 g

Approved/Certified according to:
EN 136:1998 class 3
EN 166:2001
EN 12942:1998 class TM3 (combined with fan SR 500/SR 700)
EN 14594:2005 (combined with compressed air additive SR 307)
EN 12942:1998 class TM3, ATEX 2014/34/EU ( combined with fan SR 500 EX)

High pressure washer with compact design, extendable handle and low weight. All-round machine for facade cleaning and vehicle washing. EASY!Force flush handle with EASY!Lock quick lock. Automatic start and stop. Durable construction. Equipped with brass pump and pistons with ceramic coating. High quality brass top cover. Automatic pressure relief system. Flexible, works for both vertical and horizontal operation. Screw thread connection M18x1.5 to connect surface cleaner directly to the machine. Practical storage of the rotojet and three-function nozzles. Rubber band to attach the high pressure hose. Extra carrying handle for easy loading and transport.
Standard equipment: EASY!Force flush handle, flush tube 840 mm, 10 m high-pressure hose and rotojet nozzle.

Hanging pocket with reinforced material throughout the pocket. Included in HH Connect, a system of workwear and hanging pockets for different purposes that are combined to suit the user's specific needs. The pockets are attached to the trousers using zips and press studs. Double bottom for extra durability. Several storage options and tool compartments. Built-in trash pocket. Mobile pocket with YKK zipper. Wash 40°C.
Material: 100% polyamide.

Hanging pocket specially adapted for craftsmen. Included in HH Connect, a system of workwear and hanging pockets for different purposes that are combined to suit the user's specific needs. The pockets are attached to the trousers using zips and press studs. Reinforced material throughout the pocket. Double bottom for extra durability. Several storage options and tool compartments. Hammer holder. Wash 40°C.
Material: 100% polyamide.

Hanging pocket specially adapted for electricians. Included in HH Connect, a system of workwear and hanging pockets for different purposes that are combined to suit the user's specific needs. The pockets are attached to the trousers using zips and press studs. Reinforced material throughout the pocket. Double bottom for extra durability. Several storage options and tool compartments. Tape holder. Wash 40°C.
Material: 100% polyamide.

Hanging pocket with reinforced material throughout the pocket. Included in HH Connect, a system of workwear and hanging pockets for different purposes that are combined to suit the user's specific needs. The pockets are attached to the trousers using zips and press studs. Double bottom for extra durability. Several storage compartments. Wash at 40°C.
Material: 100% polyamide.

Hanging pocket with reinforced material throughout the pocket. Included in HH Connect, a system of workwear and hanging pockets for different purposes that are combined to suit the user's specific needs. The pockets are attached to the trousers using zips and press studs. Double bottom for extra durability. Two open pockets. Pocket with YKK zipper. Wash 40°C.
Material: 100% polyamide.

Wireless, rechargeable hearing protection with Bluetooth. With adjustable listening that increases safety in the workplace by clearly hearing speech and warning signals. Connects via Bluetooth to mobile phones and other devices for phone calls and streaming. Passive hearing protection with silicone or foam earplugs. Light and ergonomic for best user comfort, does not get in the way or interfere under helmets and caps. Charged in Redlithium USB case with 3.0 Ah battery, which gives a total of up to 70 hours of operating time. One charge in the case provides up to 10 hours of operating time. Battery indicator on hearing protection and USB case. Supplied with 1 Redlithium USB case with 3.0 Ah Li-Ion battery L4B3, charging cable USB-C to USB-A, 3 pairs of foam plugs size S/M/L, 3 pairs of silicone plugs size S/M/L and 3 pairs wings size S/M/L. Attenuation value SNR 26 dB (silicone plugs), SNR 32 dB (foam plugs). 

Approved/Certified according to: 
EN 352-2:2020 
EN 352-7:2020 
EN 352-9:2020 
EN 352-10:2020

Jacket in softshell material with membrane and fleece lining. Provides protection against wind and water. Chest pocket with YKK zipper and hole for headphone cable. Hand pockets with YKK zipper. Pour for ID card. Hood with drawstring adjustment. YKK zipper at the front with hidden flap. Pre-bent sleeves. Cuffs with velcro. Back panel in four-way stretch. Extended back end for maximum comfort. Adjustable bottom edge. Wash 40°C.
Materials: 94% polyester, 8% elastane, weight 305 g/m². Secondary material 93% polyamide, 7% elastane, weight 310 g/m².

Approved/Certified according to:
Bluesign

Cut-off and miter saw with innovative, maintenance-free patented sliding arm that is very robust and durable for long-lasting and high precision. The design and suspension of the sliding arm make the saw extra compact. Intended for cross-sections, miters and grooves in wood, timber and wood composite as well as in plywood and floor panels. Powerful 2000 W motor with intelligent braking system and soft start. Miter capacity 52° to the left and 60° to the right. Tilt function up to 47° to both right and left. Equipped with double laser lines for extra precision. Easy blade change thanks to spindle lock. Extendable saw table extensions. Adjustable back panels. Compatible with Bosch Click & Clean dust extraction system.
Standard equipment: 305 mm HM blade 72 teeth and quick-release clamp.

Fri från järn, svavel och klor - Snabb kapning med mycket lång livslängd på skivan - Låg värmeutveckling och ger minimalt med grader på godset - Skivan levereras om 25st i Kronenflex box som skyddar mot luftfuktighet och yttre påverkan.
Slipmedel: Korund.
Typ 41: Rak.

Combo pack 18 V Li-Ion M18 Fuel PowerPack. 
Contents: 
M18 FDD3 Drill driver 
M18 FMTIW2F12 b> Nut driver with friction ring 
M18 FSAG125X Angle grinder 
3 pcs 5.0 Ah Li-Ion batteries, fast charger and storage bag.

Compact leaf blower 18 V Li-Ion with long tube for versatile use. Suitable for blowing away small debris and leaves. Also suitable for cleaning moulds, machines or workplaces. The air flow can be adjusted in three different speeds.
Standard equipment: Short and long nozzle.
Supplied without battery and charger.

Turbo Tack 291 är ett neutralt fukthärdande montagelim, utan lösningsmedel och ftalater. Bildar en stark och samtidig elastisk limfog, som tar upp eventuella rörelser i byggnationer. Turbo Tack 291 är luktfri, snabbhärdande och har en mycket bra väderbeständighet i olika klimat. Turbo Tack 291 kan användas både ute och inne, på vägg, tak och golv. Mycket bra vid montering av speglar, paneler och andra skivmaterial som skall monteras utan understöd. Häftar på ett brett urval av material; trä, glas, betong, mursten, glasfiber, målade ytor m.m.

Nut pliers with front and side grip function and with a spanner width from 4 mm up to 22 mm. Five-way adjustable through joint with push-button adjustment for precise adjustment of the grip width Narrow jaws make it easy to work with even in tight spaces. Robust teeth and a high ratio right up to the tip of the jaw. Forged from chrome vanadium electrical steel, induction hardened teeth up to approx. 61 HRC. Clamp stop.

White hard-wearing steel band with graduation in millimeters, with capsule in ABS plastic. Combined marks and measuring rods make it possible to quickly and easily measure and mark out both external and internal lengths. Diameter measurement with the scale on the back of the band. Matching function for marking out round shapes. The scale is always locked in normal position.
Type approved according to EU Class II.
Talmeter VP: Scale for diameter measurement on the front of the band.

Set with ultra-compact HL2-LED headlamp and IPL-LED pen lamp. Headlamp with a luminous flux of 350 lumens and three light modes. Washable sweat absorbent microfiber strap. 4 mounting clips for securing to work helmet. Pen lamp with a luminous flux of 100 lumens and up to 30 m light beam. Impact and corrosion resistant aluminum housing. Protective rubber zone when gripping the mouth for occasional hands-free use. Removable metal belt clip.
Headlamp HL2-LED:
Luminous flux: 350 / 150 / 25 lumen.
Burning time: 4 / 8.5 / 28 h.
Protection class: IP52.
Battery: 3 pcs AAA batteries (included).
Weight: 100 g.
Penlight IPL-LED:
Range: 30 m.
Light flux: 100 lumens.
Burning time: 3 h.
Protection class: IP67.
Battery: 2 pcs AAA batteries ( included).
Weight: 100 g.

Servicebyxa i lättviktsmaterial i 4-vägsstretch. Ingår i HH Connect, ett system med arbetskläder och hängfickor för olika ändamål som kan kombineras för att passa användarens specifika behov. Fickorna fästs på byxan med hjälp av blixtlås och tryckknappar. Två sidfickor och två öppna bakfickor. Ytterficka på vänster sida med YKK-dragkedja. Lårfickor med tryckknappar och flera fack. Tumstocksficka förstärkt med Cordura. Ögla för id-kort. YKK-dragkedjor. Gummerade metallknappar. Formad linning för ökad komfort. Bred bälteskanal bak. Amann-trådar. Cordura förstärkningsmaterial på knän. Knäskyddsfickor tillgängliga från utsidan. Knäskyddens position kan justeras 5 cm för optimal rörlighet. Möjlighet för ökad ventilering på sidorna. Grenkil och förböjda knän. Justerbart benavslut med tryckknappar. Möjlighet att öka benlängden med 5 cm. Reflexdetaljer. Tvätt 40°C. 
Material: 94% polyamid, 6% elastan, vikt 244 g/m². Sekundärt material 68% bomull, 32% polyester, vikt 235 g/m². Förstärkning 100% polyamid, vikt 210 g/m².

Protective sandal with toe cap and nail tread protection in composite. Reinforced nose guard. Microfiber upper with breathable air mesh lining and mesh on the sides. Light and breathable Ortholite X25 insole that provides good cushioning. EVA midsole and outsole in nitrile rubber. Boa L6 lacing system.

Approved/Certified according to:
EN ISO 20345:2011 (S1P, SRC)
IEC 61340-5-1 - ESD

New - coming in October 
Airy safety shoe with aluminum toe cap and recycled, metal-free nail tread protection. Upper in bio-based microfiber with mesh-covered ventilation openings. Lining in polyester. Padded shaft edge. Ventilating insole FX3 Soft. PU midsole. Vibram heat and oil resistant outsole in recycled nitrile with good grip. Ergothan shock absorption system. Double shock absorption zones. Stabilizer. Boa Fit System. Antistatic properties. Regular fit. 

Approved/Certified according to: 
EN ISO 20345:2022 (S1, PS, HRO, FO, SC) 
IEC 61340-5-1 - ESD

New - coming in October
Safety shoe with aluminum toe cap and recycled metal-free nail tread protection. Water-repellent upper in bio-based microfiber. Lining in polyester. Padded shaft edge. Ventilating insole FX3 Soft. PU midsole. Vibram heat and oil resistant outsole in recycled nitrile with good grip. Double shock absorption zones. Stabilizer. Boa Fit System. Free from materials of animal origin. Regular fit. Antistatic properties.

Approved/Certified according to: 
EN ISO 20345:2022 (S3S, HRO, FO, SC) 
IEC 61340- 5-1 - ESD

T-skjorte i resirkulert, funksjonsstrikket materiale som er hurtig tørkende og transporterer bort fuktighet. 
Materiale: 100% resirkulert polyester, vekt 160 g/m².

Godkjent/sertifisert i henhold til: 
OEKO-TEX 100

Light and compact dry and wet vacuum cleaner for dust class L. High suction power and semi-automatic cleaning system. Power outlet with automatic start function for power tools. Moisture-resistant PES cartridge filter makes it easy to change from wet to dry vacuuming.
Standard equipment: 1.9 m suction hose, 2 x 0.5 m metal pipe, plastic bend, 300 mm floor nozzle, joint nozzle , connection sleeve for power tools, fleece filter bag and cartridge filter PES.

Dry and wet vacuum cleaner for dust class L. Power outlet with automatic start/stop for power tools and automatic filter cleaning system for uninterrupted use. Sturdy 30-liter container with strong metal castors and protective strip. Moisture-resistant flat filter. Simple suction settings, thanks to a newly developed control and stepless speed control. Automatic disconnection at maximum filling level. Eco filter system. Antistatic device. Tool sleeve with air valve and rubber attachment guarantees optimal connection to power tools. The suction effect is regulated via the rotating ring on the lower part of the sleeve. Integrated storage space for suction hose and accessories. Practical side storage for joint nozzle and tool sleeve. Safety class I.
Standard equipment: 4 m suction hose Ø 35 mm, 2x 0.55 m stainless steel suction pipe wet/dry floor nozzle, 360 mm, joint nozzle, connection socket for power tools, fleece filter bag and plane filter, PES.

Stable and light step ladder that complies with SS-EN 131. Anodized step sides, which means that it does not blacken your hands. 80 mm wide extruded steps and spacious aluminum tool shelf for materials and tools. Work platform (300x250 mm) made of extruded aluminum profiles. Non-slip protection ensures that you stand safely and comfortably even during time-consuming work. Triple riveted connection between steps and step sides. High stability thanks to double-sided fixed brace.
* = Approved under "Good working environment choice".

Pliers set in 3 parts. Pliers with polished jaws and plastic-coated legs.
Contents:
1 pc power combination pliers 0201-180, length 180 mm
1 pc power side cutter 7401-160, length 160 mm
1 polygrip pliers 8701-250, length 250 mm

Slitstark och smidig vibrationsdämpande arbetshandske. Innerhanden är utrustad med GUIDE VIBRO?, ett 6 mm tjockt antivibrations-material, beklätt med Guides premium PU syntetläder. Ovanhand i nylon. Godkänd enligt EN ISO 10819:2013/A1:2019 (TRM 0,70 & TRH 0,57).

Small and efficient 125 mm angle grinder 18 V Li-Ion. Delivers cordless power equivalent to a 1,000 W corded sander thanks to the carbon brushless motor and ProCore 18 V battery technology. Equipped with Drop Control, KickBack Control and intelligent braking system that provides increased user protection and convenience. Drop Control function that switches off the sander immediately if it is dropped on the floor. The machine is suitable for cutting and grinding metal, stone and concrete. Compatible with all Bosch Professional 18 V batteries and chargers.
Standard equipment: Support handle, explosion protection, mounting flange, quick-lock nut and storage bag L-BOXX.
Supplied without battery and charger.

Robust, powerful 125 mm angle grinder with high performance. Metabo marathon motor and Constamatic (TC) full wave electronics. Metabo Quick system for tool-free disc change at the touch of a button. The protective cover can be adjusted without tools; twist-proof mounting. Extra Metabo VibraTech (MVT) handle for vibration dampening. Comfortable to work with, even for a long time Metabo S-automatic safety clutch: direct mechanical disconnection when blocking the disc minimizes recoil. Electronic overload protection. Electronic soft start for smooth start. Protection against restart. The gear housing can be mounted in 90° increments for left-handed use or for cutting. Disconnecting carbon brushes as protection for the motor.